Best Approved Safety Office in Riyadh | ABAK Engineering Consultancy
Choosing an approved safety office is an important step when applying for a Civil Defense permit, preparing safety drawings, obtaining a safety report, or renewing the license of an existing facility. A specialized safety office does not simply prepare a basic drawing. It studies the facility use, occupancy classification, hazard level, evacuation routes, fire alarm systems, firefighting systems, and the requirements that apply to the project.
ABAK Engineering Consultancy provides integrated safety and fire protection services, including Civil Defense drawings, evacuation plans, fire alarm and firefighting drawings, safety reports, and Civil Defense permit renewal services. ABAK also provides technical follow-up through the appropriate approval process and addresses comments when required.
This guide explains how to choose the best approved safety office, what services a specialized office should provide, and why ABAK is one of the leading options for engineering safety services in Riyadh and across Saudi Arabia.
What Is an Approved Safety Office?
An approved safety office is an engineering consultancy or qualified technical office that provides fire prevention and fire protection services in accordance with the applicable requirements in Saudi Arabia. Its services may include safety drawings, fire alarm and firefighting system design, emergency exits and evacuation routes, compliance reports, and follow-up with the relevant authorities.
The role of an approved safety office is not limited to uploading documents. The process begins with understanding the facility, classifying its occupancy and hazard level, and identifying the systems required for the specific activity. The office then prepares the drawings, calculations, reports, and technical documents needed for the project.
Before appointing a safety consultant, the facility owner should confirm that the office is qualified to provide the required services and that its approval or registration can be verified through the official channels, including the Salamah Portal and the relevant fire prevention and protection authorities.
How Do You Choose the Best Approved Safety Office?
Choosing the best approved safety office should not depend on price alone. The quality of the drawings, the accuracy of the technical review, the consultant’s experience, and the ability to follow up on comments can directly affect the approval timeline and the safety of the facility.
Verify the Approval and Scope of Services
The first step is to confirm that the office provides safety services within its approved professional scope. The office should also have the capability to prepare the drawings and reports required for the type of facility involved.
It is important to confirm that the office is familiar with the Salamah Portal and the procedures related to fire prevention and fire protection services.
Check Experience with Similar Facilities
Safety requirements for a villa are different from those for a restaurant, school, warehouse, factory, tower, or commercial building. Therefore, the selected office should have experience with the same type of activity and understand its specific risks, occupant load, operating conditions, and fire protection requirements.
Look for Integrated Safety Drawings
A qualified safety office should be able to coordinate architectural, electrical, and mechanical drawings. This includes emergency exits, evacuation routes, fire alarm systems, sprinklers, fire hose cabinets, fire pumps, water tanks, emergency lighting, and smoke control systems where applicable.
Review the Drawings Before Submission
Many approval delays are caused by incomplete information, inconsistent data, incorrect hazard classification, and clashes between disciplines. A specialized office should review the drawings, calculations, site conditions, and facility permit before submission.
Confirm Follow-Up After Submission
Some service providers stop after delivering the drawings. A professional safety office continues to follow up on technical comments and updates the documents when necessary. This can reduce repeated submissions and help the facility owner complete the approval process more efficiently.
Why Choose ABAK as an Approved Safety Office?
ABAK Engineering Consultancy is one of the leading options for safety and fire protection consultancy services. ABAK provides integrated engineering solutions that begin with facility assessment and hazard classification and continue through the preparation, submission, and follow-up of safety drawings and reports.
ABAK combines engineering expertise, knowledge of government platforms, and coordination between multiple disciplines. This enables facility owners to work with one engineering partner instead of managing separate providers for architectural, electrical, mechanical, and fire protection requirements.
ABAK’s safety services include Civil Defense drawings, fire alarm and firefighting plans, evacuation drawings, safety reports, Civil Defense permit renewal, and safety system reviews for buildings and facilities.
Experience in Civil Defense Drawings
ABAK prepares Civil Defense drawings according to the facility activity, occupancy classification, hazard level, applicable code requirements, and authority requirements. The drawings may show fire alarm devices, detectors, emergency exits, evacuation routes, fire extinguishers, fire hose cabinets, firefighting networks, sprinklers, fire pump rooms, water tanks, and Civil Defense connections where required.
Solutions for Different Types of Facilities
ABAK does not apply one generic solution to every facility. The scope of work is determined after reviewing the activity, area, number of floors, occupancy, and hazard level.
The services can be tailored for offices, villas, residential buildings, towers, restaurants, cafés, schools, warehouses, factories, showrooms, workshops, commercial buildings, and other facilities.
Coordination Between Engineering Disciplines
Safety drawings must be coordinated with architectural, structural, electrical, and mechanical drawings. For example, a fire detector may conflict with a suspended ceiling, a firefighting pipe may conflict with a structural beam, or an evacuation route may be affected by an architectural change.
Integrated coordination helps identify these issues before construction or before submission. This reduces costly modifications and improves the quality of the final drawings.
Approval Process Follow-Up
ABAK supports the preparation and submission of safety drawings and reports through the appropriate process. The team can also help address technical comments and update the documents when required.
The goal is to simplify the process for the facility owner and reduce delays caused by missing information, unclear drawings, or incomplete technical documentation.
Safety Services Provided by ABAK
Safety Drawings Design
This service includes drawings for fire prevention and fire protection, such as evacuation plans, emergency exits, escape routes, emergency lighting, exit signs, assembly areas, and fire compartmentation where required.
Fire Alarm System Drawings
Fire alarm drawings identify the fire alarm control panel, detectors, manual call points, sounders, visual notification devices, cable routes, power supplies, and alarm zones.
The distribution of devices is designed according to the facility layout, ceiling type, concealed spaces, room use, and risk level.
Firefighting and Sprinkler Drawings
Firefighting drawings show the locations of sprinklers, fire hose cabinets, portable extinguishers, fire pumps, water tanks, valves, pipes, and external fire department connections.
Some facilities may require hydraulic calculations to determine flow, pressure, pump capacity, water tank capacity, and pipe diameters.
Evacuation and Emergency Plans
Evacuation plans show the routes from occupied areas to safe exits. They identify exit directions, assembly points, emergency equipment, and important safety information.
The plans should be clear and suitable for the occupants, employees, visitors, and users of the facility.
Safety and Compliance Reports
Safety reports are prepared after reviewing the facility and its existing systems. The report may include the current conditions, safety equipment inventory, identified observations, compliance review, and recommended corrective actions.
Civil Defense Permit Issuance and Renewal
ABAK assists facility owners in preparing the drawings, reports, and documents required for Civil Defense permit issuance or renewal. The facility and its safety systems can also be reviewed before submission or inspection.
Updating Drawings for Existing Facilities
Existing facilities may no longer match their old drawings because of renovations, changes in use, internal partitions, or modifications to safety systems.
In such cases, the work begins with a site survey and review of the actual conditions. Updated or as-built drawings can then be prepared to reflect the current facility and its installed systems.
Why Should Safety Drawings Be Designed Before Construction?
Preparing safety drawings at an early stage allows the project team to identify requirements before construction starts. This can reduce the need to relocate doors, remove ceilings, change pipe routes, or modify cable routes after installation.
Early design also helps determine the required space for fire pump rooms and water tanks, the locations of fire alarm panels, fire protection pipe routes, emergency exits, corridor widths, and stair requirements.
Constructing safety systems without a coordinated design may result in equipment being installed in unsuitable locations, insufficient coverage, system clashes, or differences between the installed work and the approved drawings.
When Do You Need an Approved Safety Office?
A facility may need the services of an approved safety office in the following situations:
- Constructing a new building or facility.
- Applying for a Civil Defense permit for the first time.
- Renewing a Civil Defense permit or safety certificate.
- Changing the activity or occupancy of the facility.
- Adding a floor, mezzanine, or new area.
- Changing the internal layout or partitions.
- Modifying emergency exits or evacuation routes.
- Changing the fire alarm, firefighting, or sprinkler systems.
- Preparing as-built drawings for an existing building.
- Preparing for inspection or addressing authority comments.
- Preparing a safety or system compliance report.
Working Process with ABAK Engineering Consultancy
- Receiving project information: The activity, location, area, number of floors, and available drawings are collected.
- Studying the facility: The occupancy, hazard level, use, and applicable requirements are reviewed.
- Site inspection: Existing facilities are inspected to review the actual conditions, safety systems, exits, and evacuation routes.
- Preparing the design: Safety, fire alarm, firefighting, sprinkler, and evacuation drawings are prepared according to the project requirements.
- Coordination and review: The drawings are checked against architectural, electrical, mechanical, and structural information.
- Preparing reports and calculations: Technical calculations, equipment schedules, compliance reports, or safety reports are prepared where required.
- Submission and follow-up: The documents are submitted through the appropriate process and technical comments are followed up.
- Final delivery: The final drawings and documents are delivered according to the agreed scope of work.
What Is the Difference Between a Safety Office and a Safety System Contractor?
An approved safety office focuses on engineering and consultancy services. These services include facility assessment, safety drawings, technical reports, calculations, coordination, and approval follow-up.
A safety system contractor focuses mainly on supplying, installing, testing, and commissioning the equipment and systems at the facility.
A project may require both parties. The engineering consultant defines the appropriate system, equipment locations, and design requirements, while the contractor installs and tests the systems according to the approved drawings.
The existence of fire safety equipment alone does not necessarily mean that the facility complies with the applicable requirements. Compliance also depends on proper design, sufficient coverage, correct installation, testing, and consistency between the installed work and the approved drawings.
Common Mistakes When Choosing a Safety Office
One of the most common mistakes is choosing a provider based only on the lowest price without checking its professional scope, experience, or ability to follow up on technical comments.
Another mistake is providing outdated drawings, failing to disclose actual modifications, ignoring a change in activity, installing systems before the drawings are approved, or working with a provider that cannot address technical comments.
Facility owners should also be cautious of any provider that promises guaranteed approval or claims that technical requirements can be bypassed. Approval depends on the compliance of the design, actual conditions, applicable codes, and authority requirements.
Why Is ABAK One of the Leading Safety Service Options?
ABAK provides safety services as part of an integrated engineering consultancy. Safety drawings are not treated as an isolated document. Instead, the relationship between the building use, architectural design, electrical systems, mechanical systems, and fire protection requirements is reviewed together.
ABAK provides clients with:
- A specialized engineering team for safety and fire protection services.
- Civil Defense, evacuation, fire alarm, and firefighting drawings.
- Occupancy and hazard classification review.
- Coordination with other engineering disciplines.
- Technical reports and calculations where required.
- Site surveys and updated as-built drawings for existing facilities.
- Technical comment follow-up and document updates.
- Safety solutions for residential, commercial, administrative, and industrial buildings.
- Integrated support for Civil Defense permit issuance and renewal.
According to the information published on the ABAK website, the company provides safety system design and Civil Defense permit renewal services in addition to architectural design, licensing, and engineering supervision services. ABAK’s safety drawing service includes facility classification, site inspection, system design, drawing preparation, submission through the Salamah Portal, and follow-up until approval.
Frequently Asked Questions About Approved Safety Offices
How can I verify whether a safety office is approved?
You can verify the office through official channels and the relevant authorities. You should also check the Salamah Portal or the official list of engineering consultancy and technical service offices approved for fire prevention and fire protection. The scope of approval should match the service required for your facility.
Is ABAK a Civil Defense approved safety company?
ABAK provides fire prevention and fire protection services, including Civil Defense drawings, submission, and follow-up through the Salamah Portal according to the applicable service scope. For the most accurate confirmation, facility owners should verify the current approval status through the official list or platform at the time of submitting the application, as approval records and requirements may change.
Does a safety office only design drawings?
Services vary from one office to another. ABAK provides an integrated scope that may include facility assessment, hazard classification, site inspection, drawing design, reports, calculations, submission, and technical comment follow-up according to the project requirements.
Can a safety office help renew a Civil Defense permit?
Yes. A specialized safety office can help prepare the drawings, reports, and documents required for renewal and review the readiness of the facility and its safety systems before submission or inspection.
Does an existing facility need new safety drawings?
An existing facility may need updated drawings if the old drawings do not match the current conditions, if the activity or internal layout has changed, or if the safety systems have been modified.
In this case, the facility is inspected and updated or as-built drawings are prepared to reflect the actual building and installed systems.
How much do approved safety office services cost?
The cost depends on the facility activity, area, number of floors, available drawings, number of safety systems, site condition, and required follow-up scope. It is recommended to provide the project details and available drawings to receive an appropriate quotation.
Can a safety office guarantee approval on the first submission?
No consultant can guarantee the final decision of the relevant authority because approval depends on the design, actual site conditions, codes, and applicable requirements. However, a specialized office can reduce the likelihood of rejection by conducting a technical review, coordinating the disciplines, and completing the required information before submission.
Conclusion
Choosing the best approved safety office requires more than comparing prices. Facility owners should consider professional approval, experience, technical capability, multidisciplinary coordination, quality of drawings, and the ability to follow up on comments.
ABAK Engineering Consultancy provides integrated safety services, starting with facility assessment and Civil Defense drawing design and extending to technical reports, submission, and follow-up. The ABAK team can review your facility requirements and identify the drawings and reports needed before starting the approval or renewal process.
Contact ABAK Engineering Consultancy for a consultation about safety drawings, fire protection systems, or Civil Defense permits. Share your facility details so the appropriate scope of work can be determined.
Official Sources and References
- Saudi Civil Defense — Engineering Consultancy and Technical Service Offices for Fire Prevention and Fire Protection
- Salamah Portal — Safety and Fire Prevention Services Platform
- Saudi Building Code — SBC 801
- ABAK Engineering Consultancy — Safety Systems Design and Approval
- ABAK Engineering Consultancy — Engineering and Safety Services



