Many property owners and facility managers begin with a simple request: “I need a technical report.” However, a technical report is not one standard document for every situation. It may be an instant technical report, a safety technical report, an engineering project report, or a building condition report. The correct type depends on the authority, platform, service and current condition of the facility.
In this guide, ABAK Engineering Consultancy explains the difference between the main types of technical reports, when each one is required, who prepares and approves it, and how to distinguish a Balady technical report from a safety report submitted through the Civil Defense Salamah Portal.
What Is a Technical Report?
A technical report is a document prepared by an engineering office or qualified technical consultant after reviewing documents, inspecting a site or carrying out specific technical checks. Its purpose is to document the condition of a building or project and assess its compliance with the applicable technical and regulatory requirements.
The name of the report alone does not determine its purpose. The requesting platform and approving authority determine the scope, supporting documents and acceptance criteria. Therefore, the important question is not simply “Do I need a technical report?” but rather “Which technical report does my transaction require?”
What Is an Instant Technical Report?
The term “instant technical report” may be used in some safety transactions to describe a faster process when the activity classification and risk level allow it. It does not mean that the report is issued without verification, or that every facility qualifies for this route.
The platform determines the appropriate process according to the activity type, area, risk level and registered information. Some activities may require a declaration or safety equipment certificate, while other activities may require a technical safety report or a non-immediate report supported by a site inspection and technical review.
For this reason, the instant route should not be selected based only on personal judgment. The applicant should review the requirement displayed in the Salamah Portal before appointing a consultant or uploading documents.
What Is a Technical Safety Report?
A technical safety report focuses on the fire prevention and protection systems of a facility. It is prepared by an engineering consultancy approved for fire prevention and protection services after reviewing the drawings, inspecting the site and checking the installed systems according to the facility type and the applicable requirements.
A technical safety report may cover the following items:
- Fire extinguishers, validity and distribution.
- Fire alarm systems and detection devices.
- Firefighting systems, sprinkler networks and fire hose cabinets.
- Emergency exits and evacuation routes.
- Emergency lighting and exit signs.
- Visible electrical installations and potential sources of risk.
- Ventilation and smoke control systems where required.
- Fire pumps, tanks and Civil Defense connections where required.
The inspection scope depends on the facility type, area and classification. A previous report does not automatically guarantee the issuance of a new report without checking the current site condition.
What Is an Engineering Project Technical Report?
An engineering project technical report relates to construction, development, renovation, extension or modification works in a new or existing building. It may document the completed works, their compliance with approved drawings, the technical observations that require correction and the documents needed to complete the relevant procedure.
An engineering project report may be required for:
- Issuing or modifying a building permit.
- Assessing completed works in an existing project.
- Completing occupancy or construction completion requirements.
- Extension, renovation or change of building use.
- Documenting the project condition before completion or handover.
The report should clearly state the inspection scope, documents reviewed, technical observations, photographs and supporting drawings or evidence where required.
What Is a Building Condition Report?
A building condition report describes the condition of a building at the time of inspection. Depending on the assignment, it may cover structural, architectural, electrical or mechanical elements.
A building condition report does not automatically replace a safety report, Civil Defense safety certificate or municipal technical report. Each document has a different purpose and approving authority. The purpose should therefore be defined before starting, whether the report is needed for purchasing, leasing, assessing completed works, resolving observations or completing an official requirement.
Balady Technical Report vs. Salamah Safety Report
| Comparison | Balady Technical Report | Salamah Safety Report |
|---|---|---|
| Platform | Balady Platform | Salamah Portal of Civil Defense |
| Purpose | Completing a construction service or a requirement related to a building permit or cadastral decision | Issuing or renewing a safety and Civil Defense license |
| Scope | Building, permit, construction works and related procedures | Fire prevention, fire protection, emergency exits and evacuation systems |
| Prepared by | An engineering office selected through the platform | An engineering consultancy approved for fire prevention and protection |
| Approving authority | The municipality or relevant municipal authority | Civil Defense through the Salamah Portal |
How Do You Know Which Report You Need?
Before requesting any technical report, answer the following questions:
- What service are you completing: a building permit, occupancy certificate or Civil Defense license?
- Which platform requested the report: Balady or Salamah?
- Is the report related to an engineering project, an existing facility or fire protection systems?
- Does the platform request a technical report, a non-immediate safety report or approved safety drawings?
- Is the appointed office approved to provide this specific type of report?
Some facilities may require more than one document. A new building may need construction documents through Balady as well as safety documents through Salamah. A report submitted on one platform does not replace a requirement on the other platform.
Common Technical Report Mistakes
- Requesting a report from an office that is not approved for the required service.
- Using a Balady report instead of a safety report, or the opposite.
- Entering an activity or area that does not match the permit or commercial record.
- Uploading outdated drawings that do not reflect the actual building.
- Postponing the inspection until concealed works and installations are closed.
- Resubmitting the report without correcting the recorded observations.
- Failing to confirm the activity classification in the Salamah Portal.
How ABAK Engineering Consultancy Can Help
ABAK Engineering Consultancy can help identify the correct report before the process begins, whether you need a technical report for a construction service, an engineering project report, a building condition report or a technical safety report through the Salamah Portal.
The process begins with reviewing the request and available documents, defining the service scope, inspecting the site when required, documenting observations with photographs and technical information, preparing the report and following the submission according to the requirements of the relevant authority.
Frequently Asked Questions
Is an instant technical report the same as a technical safety report?
Not necessarily. An instant report describes a process determined by the platform for certain activities, while a technical safety report focuses on fire prevention and protection systems. The actual requirement should be confirmed through the Salamah Portal.
Can a Balady technical report be used to obtain a Civil Defense license?
No. A Balady report is related to Balady construction services and permits, while a Civil Defense license requires the documents specified in the Salamah Portal according to the activity classification.
Does a building condition report replace a safety certificate?
No. A building condition report describes the existing condition within the agreed scope, while a safety certificate confirms compliance with the safety requirements set by the competent authority.
Who prepares an engineering project technical report?
An engineering office or consultant qualified for the report type prepares it. The office’s approval and scope should be verified before signing the agreement.
How long does a technical report take?
The time depends on the report type, document completeness, site inspection requirements and the need to correct observations. Balady publishes the service period for each service, while safety report timelines vary according to the activity and inspection scope.



